Dynojet 17-073 Power Commander V

Description

DYNOJET - Dynojet 17-073
Category:
Power Commander V
Category Description:
Fuel control for each individual cylinder in a smaller enclosure
"Warm-up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
Reduced size from the PCIII USB
Easy to install
USB powered from computer; 9 volt adapter is no longer needed
Two-position map-switching function built in
Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
Gear/speed input allows for map adjustment based on gear
Analog input allows user to install any 0-5 volt sensor
Build an adjustment table based on analog input such as boost or temperature
Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
More tuning ranges than PCIII USB
Enhanced "accel pump" utility
Made in the U.S.A.
SECONDARY FUEL MODULE
Allows for the adjustment of all eight-injectors
Adjust both upper and lower injectors by as much as +250/-100%
The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
See application chart for availability
Single cable connection to the PCV
You can also map each injector separately, giving you up to 48 complete maps
Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
Connects to the upper injector rail using OEM connectors
If gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis
The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
Once the sensor is attached you will have full Quick Shifter functionality
The QEM connects to the upper injectors and then into the PCV
The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
Stock photo (Some items pictured may not be included):
eBay Photo Disclaimer:
Stock Photo(s) shown in this listing may be provided by eBay (and could be inaccurate). 58cycle does not guarantee the accuracy of the eBay picture shown. Actual product may vary from picture. Some items pictured may not be included.
58cycle guarantees that you receive the Part # in this listing by the listed manufacturer or brand.
Please refer to the manufacturer's website for complete list of components included by the manufacturer. No other parts are included or can be substituted, selected, or changed.
Some items may not be able to ship to California. Those orders will be fully refunded.