Dobeck 3.0 Electronic Jet Kit 9120273

Description

Dobeck 3.0 Electronic Jet Kit 9120273
"INSTALL AND RIDE, EFI MADE EASY."
The
EJK (Electronic Jet Kit)
evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the
EJK
is a customizable solution for the shop that wants to take control of their tuning needs.
No computer needed
No dyno required
Quick "plug and play" installation, initial settings are all preset based on make/model
Full range tunability, does not interfere with stock ECU
Simple push button adjustment interface
2 year warranty
The
GEN 3
is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The
GEN 3
has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer. The
GEN 3
also is nitrous oxide compatible, and allows the user to add fuel thru the stock fuel injection when using nitrous oxide.
The
GEN 3.5
EFI controller is an extension to the
GEN 3
controller. The
GEN 3.5
controller has the ability to add or pull fuel within each available fueling zone. The
GEN 3.5
is NOT compatible with nitrous oxide systems.
Not legal for use in California on pollution controlled vehicles, race use only in California - waiver available
* Must disconnect or bypass O2 sensors, wiring included if needed